SKJ72001 SKP Ignition Knock Detonation Sensor Connector

Review SKP Ignition Knock Detonation Sensor Connector-connector

The SKP SKJ72001 Ignition Knock Detonation Sensor Connector is an essential automotive part designed to maintain the optimal performance of your vehicle's engine. This connector is specifically engineered for use with the Ignition Knock Detonation Sensor, which monitors engine sounds for knocking or pinging caused by detonation, allowing your vehicle's engine control unit (ECU) to adjust the fuel and ignition timing to prevent further damage.

The connector is made from high-quality materials, with a robust housing designed to protect it from environmental influences and vehicular vibrations. Each wire is securely insulated, and the connector pins are gold-plated to ensure a reliable and stable electrical connection. The colors of the wires are clearly labeled for easy identification and installation.

This connector has a 13-pin design, which enables it to effectively communicate between the Ignition Knock Detonation Sensor and the engine control unit. The seventeen contact points consist of twelve terminals for the sensor and its ground wires, and one extra key pin for diagnosing and fault-code reading.

The SKP SKJ72001 Ignition Knock Detonation Sensor Connector incorporates a moisture-resistant design, assuring reliability and durability even under extreme conditions. The durable, UV-stabilized cable jacket offers resistance to sun damage, while the connector's compact size allows for simple, hassle-free installation in various vehicle applications.

This sensor connector is suitable for various makes and models, making it a versatile addition to any mechanic or DIY enthusiast's toolkit. As a premier aftermarket automotive part, the SKP SKJ72001 Ignition Knock Detonation Sensor Connector is the go-to choice for maintaining optimal engine performance and ensuring your vehicle operates at its best.

1. Direct OEM replacement: This connector is designed as an original equipment manufacturer (OEM) replacement part for certain vehicles, ensuring a secure and reliable fit.

2. Contributes to smooth engine operation: A faulty ignition knock sensor can cause engine misfires, rough idling, and even damage the engine. Replacing it with a new connector can help restore smooth engine operation.

3. May prevent check engine light from illuminating: If the check engine light in your vehicle is on due to a faulty ignition knock sensor, replacing the connector can potentially clear the code and turn off the light.

4. May save labor costs: Replacing the connector is usually less expensive than having the entire sensor replaced, as the sensor itself is typically more expensive than the connector.

1. Diagnostic challenge: Identifying if the problem lies with the sensor itself or the connector can be a challenge, making it essential to have a solid diagnosis before purchasing this part.

2. Potential for wiring damage: Depending on the cause of the fault, there could be wiring damage, which would require additional repairs beyond just replacing the connector.

3. Not a standalone solution: Replacing the connection only solves the issue if the connector itself is faulty. Other causal factors, like worn sensor or wiring issues, should be addressed separately.

Replacing a faulty ignition knock sensor connector (SKP SKJ72001) can help restore smooth engine operation and potentially save diagnosing and labor costs if the connector is the root cause of the problem. However, it is crucial to diagnose the issue accurately and consider the potential for other causes before deciding to replace the connector.

Before purchasing an ignition knock sensor connector, gather accurate diagnostic information related to engine performance issues. If testing reveals that the connector is indeed faulty, then this part could be an effective and more affordable solution compared to replacement of the entire ignition knock sensor. Always ensure that you follow the manufacturer's guidelines for replacement procedures, and maintain proper vehicle maintenance schedules to minimize future faults.

Details:

The product is an ignition knock detonation sensor connector manufactured by Skp, with the manufacturer part number SKJ72001. It is designed for use with ignition knock sensors and serves as a connector to facilitate the electrical connection. This product is commonly used in ignition systems to help detect engine knocking and prevent potential damage.

specifications ignitioncomp:

• brand: Skp
• mpn: Skj72001
• part type: Ignition Sensor
• product type: Ignition Knock
• upc: 842296182998

offer ignitioncomp:

• prices: $31.95–$42.38
• item condition: New
• availability: in stock
• best offers: true
• options: ship-to-home
• in stock #: 5
• started: february 9, 2025
• sold #: 23

shipping ignitioncomp:

• class: standard
• transit: 5-11 days
• carrier: usps
• service: usps ground advantage
• type: calculated

returns ignitioncomp:

• policy: no returns

payments ignitioncomp:

• other
• credit card: mastercard
• wallet: google-pay

general ignitioncomp:

• category: Auto Parts > Car Truck Accessories > Ignition Systems Components

seller ignitioncomp:

• rating: 99.2%
• city: lexington, south carolina
• # reviews: 907